Hummer 2003 H2 Owner's Manual page 300

Power Winch Platform (If Equipped)
You can use the power winch platform with an
aftermarket winch. Connect the winch to the platform
and wiring to the vehicle following the winch
manufacturer's guidelines.
1. Slide the winch platform into the front receiver of
your vehicle. To secure it, follow the next step.
You will be using the locking pin included with the
jack/tool kit. See "Changing a Flat Tire" in the Index
for more information on location.
2. Slide the pin down through the hole in the front
bumper and into the receiver.
4-72
If you look under the
receiver you will see the
locking portion (clip) of
the pin coming through
the bottom hole in the
receiver.
3. Turn the clip so that it is
perpendicular to the pin.
Pin is shown off of the
vehicle for clarity.