Table of Contents
Advertisement
CAUTION:
Using a match near a battery can cause battery
gas to explode. People have been hurt doing this,
and some have been blinded. Use a flashlight if
you need more light.
Be sure the battery has enough water. You don't
need to add water to the ACDelco
installed in your new vehicle. But if a battery has
filler caps, be sure the right amount of fluid is
there. If it is low, add water to take care of that
first. If you don't, explosive gas could be present.
Battery fluid contains acid that can burn you.
Don't get it on you. If you accidentally get it in
your eyes or on your skin, flush the place with
water and get medical help immediately.
Fans or other moving engine parts can injure you
badly. Keep your hands away from moving parts
once the engine is running.
R
5. Check that the jumper cables don't have loose or
battery
CAUTION:
missing insulation. If they do, you could get a shock.
The vehicles could be damaged too.
Before you connect the cables, here are some basic
things you should know. Positive (+) will go to
positive (+) or to a remote positive (+) terminal if the
vehicle has one. Negative (
unpainted metal engine part or a remote negative (
terminal if the vehicle has one. Don't connect
-
positive (+) to negative (
would damage the battery and maybe other parts too.
-
) will go to a heavy,
-
) or you'll get a short that
5-5
)
Advertisement
Chapters
Table of Contents
