Table of Contents
Advertisement
You can also reset the PERSONAL: XX MI, or
BUSINESS: XX MI, while they are displayed by
pressing the reset stem on the cluster. If you press and
hold the reset stem or select button for four seconds,
the display will show the distance traveled since the last
ignition cycle for the personal or business trip.
Season Odometer
Press the trip information button until SEASON
ODOMETER appears on the display. This shows the
total distance the vehicle has been driven in either miles
or kilometers. Pressing the reset stem located on the
instrument cluster with the vehicle off will also display
the season odometer.
Hourmeter
Press the trip button to scroll to the hourmeter.
The hourmeter shows the total number of hours the
engine has run. Pressing the reset stem on the instrument
cluster will also display the hourmeter after the season
odometer is displayed.
Annual Log
Press the trip button to scroll to the annual log.
The annual log shows the mileage accumulated since
it was last reset. To reset the annual log, press and hold
the select button for two seconds.
Timer
The DIC can be used as a stopwatch. Press the select
button while TIMER is displayed to start the timer.
The display will show the amount of time that has
passed since the timer was last reset (not including time
the ignition is off). Time will continue to be counted
as long as the ignition is on, even if another display is
being shown on the DIC. The timer will record up to
99 hours, 59 minutes and 59 seconds (99:59:59) after
which the display will roll back to zero.
To stop the counting of time, press the select button
briefly while TIMER is displayed.
To reset the timer to zero, press and hold the select
button while TIMER is displayed.
2-97
Advertisement
Chapters
Table of Contents
