Storing The Machine; Replacing The Depth Wheel; Replacing The Skirt - Stihl FCS-KM Instruction Manual

English

Storing the Machine

For periods of 3 months or longer
Remove, clean and inspect the
N
cutting blade.
If the KombiTool is removed from
N
the KombiEngine and stored
separately: Fit the protective cap on
the drive tube to avoid dirt getting
into the coupling.
Store the machine in a dry, high or
N
locked location – out of the reach of
children and other unauthorized
persons.
12

Replacing the Depth Wheel

Have a worn depth wheel replaced by a
servicing dealer. STIHL recommends
that you have servicing and repair work
carried out exclusively by an authorized
STIHL servicing dealer.
Depth Wheel
2
The end of the thread on the
N
screw (1) is peened over to ensure
that the wingnut (2) does not work
loose and be lost.
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case have the
screw and wingnut replaced by a
servicing dealer.

Replacing the Skirt

Removing the skirt
1
Undo and remove the screw (1).
N
Remove the washer (2)
N
Pull the skirt (3) out of the
N
segment (6) and out of the gap (5) in
the deflector
5
4
1
2
6
3
FCS-KM