Multifunction Lever; Turn Signal And Lane Change Indicator - GMC 1999 Suburban Owner's Manual

Table of Contents

Advertisement

Multifunction Lever

The lever on the left side of the steering column
includes your:
D

Turn Signal and Lane Change Indicator

D
Headlamp High/Low Beam Changer
D
Windshield Wipers
D
Windshield Washer
D
Cruise Control (If Equipped)
2-34
Turn Signal and Lane Change Indicator
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
If you move the lever all the way up or down and the arrow
flashes at twice the normal rate, a signal bulb may be burned
out and other drivers may not see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check for burned
fuse (see "Fuses" in the Index).
An arrow on the instrument
panel will flash in the
direction of the turn or
lane change.
-
out bulbs and a blown
yellowblue

Advertisement

Table of Contents
loading

This manual is also suitable for:

1999 yukon

Table of Contents