2-68 Steering Wheel. and Column - Tilt
1
290193
290192
1
290192
Multifunction Turn Signal Lever
Replacement - On Vehicle
Removal Procedure
Steering
1 .
Remove the steering column tilt wheel release
lever, if equipped with cruise control. Refer to
Tilt Lever Replacement - On Vehicle.
2. Remove the access cover, if equipped with
cruise control.
3. Disconnect the electrical connectors (4, 5),
if equipped with cruise control.
4. Grasp the lever firmly (1).
5. Pull the lever (1) straight out in order to remove.
Installation Procedure
1. Position the tang (2) on the lever (1) to the
notch (3) in the column (4).
Important: Ensure that the wiper switch is in the
OFF position before you install the lever.
2. Install the lever (1) to the column (4).
Important: Ensure that the lever (1) is fully seated.
3. Install the electrical connectors, if equipped
with cruise control.
4. Install the access cover, if equipped with
cruise control.
5. Install the steering column tilt wheel release lever,
if equipped with cruise control. Refer to Tilt Lever
Replacement - On Vehicle.
(
(
(