Power Winches; Step-Bumper Pad - GMC 1998 Yukon Owner's Manual

Power Winch
- 3
If you wish to use a power winch on your vehicle, only
use it when your vehicle is stationary or anchored.
I
NOTICE:
Using a power winch with the transmission in
gear may damage the transmission. When
operating a power winch, always leave the
transmission in NEUTRAL (N).
I
If you will be using the
bumper to tow a trailer, you
must remove the center
cutout circle to install the
trailer ball. You must also
remove both outer cutouts
Use the regular brakes, set the parking brake, or block
the wheels to keep your vehicle from rolling.
Step-Bumper Pad
If your vehicle has a rear step bumper,
it
may be
equipped with a rear step pad at the center of
the bumper.
. .
To remove the pad, lift the
edge of the pad from the
rear of the burnper and
swing
it
forward. When the
pad releases from the
bumper holes, lift the
pad off.
4-58