Interior Lamps; Instrument Panel Intensity Control; Illuminated Entry; Dome Lamps - GMC 1998 Yukon Owner's Manual

Table of Contents

Advertisement

When it begins to get dark, your
DRL
indicator light is a
reminder to turn your headlamp switch on. The other
lamps that come on with your headlamps will also
come
on.
When you turn the headlamp switch off, the regular
lamps will go off, and your headlamps will change to
the reduced brightness of DRL.
To idle your vehicle with the DRL off, set the parking
brake. The DRL will stay off until you release the
parking brake.
As with any vehicle, you should turn on the regular
headlamp system when you need it.
Interior Lamps
Instrument Panel Intensity Control
The instrument panel intensity control is located next to
the parkingheadlamp switch. Rotate the thumb wheel up
to adjust the instrument panel lights. Rotate the thumb
wheel up to the first notch to return the radio display and
gear shift indicator LED display to full intensity when the
headlamps or parking lamps are on. To turn on the dome
lamps (with the vehicle doors closed) rotate the thumb
wheel up to the second notch position.
Illuminated Entry
Your vehicle is equipped with an illuminated
entry feature.
When the doors are opened, the dome lamps will come
on if the dome lamp button is in the out position. When
all doors are closed or the dome lamp button is pressed
in, the lamps will stay on for a short period of time and
will then go out.
Dome Lamps
The dome lamps will come on when you open the doors
You can also turn the dome lamps on by rotating the
thumb wheel, located next to the parking/headlamps
switch knob, all the way up to the second notch. In this
position, the dome lamps will remain on whether the
doors are opened or closed.
2-42

Advertisement

Table of Contents
loading

This manual is also suitable for:

1998 suburban

Table of Contents