Shifting Into Park (P) - GMC 1998 Yukon Owner's Manual

To release the parking
brake, hold the regular
brake pedal down.
Pull the lever, located just
above the parking brake
pedal, marked BRAKE
RELEASE, to release the
parking brake.
If the ignition is on when the parking brake is released,
the brake system warning light will go off.
NOTICE:
Driving with the parking brake on can cause
your rear brakes to overheat. You may have to
replace them, and you could also damage other
parts of your vehicle.
If you are towing a trailer and are parking on any hill,
see "Towing a Trailer" in the Index. That section shows
what to do first to keep the trailer from moving.
Shifting Into PARK (P)
I
I
It can be dangerous to get out
of
your vehicle if
the shift lever is not fully in PARK (P) with the
parking brake firmly set. Your vehicle can roll.
If you have left the engine running, the vehicle
can move suddenly. You or others could be
injured. To be sure your vehicle won't move, even
when you're
on
fairly level ground, use the steps
that follow.
I f
you have four-wheel drive and
your transfer case is in NEUTRAL (N), your
vehicle will be free to roll, even if your shift lever
is in PARK (P). So, be sure the transfer case is in
a drive gear
--
not in NEUTRAL (N). I f you're
pulling
a trailer, see "Towing a Trailer" in
the Index.
2-25