GMC 1995 Jimmy Owner's Manual page 325

Table of Contents

Advertisement

Maintenance Schedule I
36,000 Miles (60 000 km)
0
Change engine oil and filter (or every 3 months, whichever occurs
first). An Emission Control Service.
0
Lubricate the front suspension, ball joints (ball joints should not be
lubricated unless their temperature is 10
O F
(-1 2°C) or higher. When
the weather is cold, let them warm up before lubricating them or they
could be damaged.), steering linkage and transfer case shift linkage,
parking brake cable guides, propshaft splines, universal joints, brake
pedal springs, and clutch pedal springs at every oil change (or every 6
months, whichever occurs first).
constant velocity joints and axle seals for leaking.**
0
Check readfront axle fluid level and add fluid as needed. Check
I
DATE
I
ACTUALMILEAGE
I
SERVICED BY:
I
39,000 Miles (65 000 km)
0
Change engine oil and filter (or every 3 months, whichever occurs
Lubricate the front suspension, ball joints (ball joints should not be
first). An Emission Control Service.
lubricated unless their temperature is 10
O F
(-1
2
O
C) or higher. When
the weather is cold, let them warm up before lubricating them or they
could be damaged.), steering linkage and transfer case shift linkage,
parking brake cable guides, propshaft splines, universal joints, brake
pedal springs, and clutch pedal springs at every oil change (or every 6
months, whichever occurs first).
0
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.**
DATE
SERVICED BY:
ACTUAL MILEAGE
7- 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents