Filters - ATEN RCM416 User Manual

4. When you have finished making your choices, click Save.
5. In the confirmation popup that appears, click OK.
Note: In any of the columns, you can use Shift-Click or Ctrl-Click to select a
group of ports to configure. Clicking to cycle through the choices on
any one of the selected ports causes all of them to cycle in unison.

Filters

There are five filters at the top of the columns that allow you to expand or limit
the scope of the ports that are displayed in the Name column, as described in
the following table:
Filter
Name
Access All
Full
Access
View Only
No Access
USB All
Full
Access
Read Only
No Access
Config All
Permitted
Restricted
PON All
Permitted
Restricted
To filter on the port name, key in the name then press Enter.
Only the ports whose names correspond to what you have keyed
in appear in the list.
Wildcards (? for single characters; * for multiple characters) and
the keyword or are supported. E.g., h*ds would return hands and
hoods; h?nd would return hand and hind, but not hard; h*ds or
h*ks would return hands and hooks.
All ports appear in the list.
Only ports configured as Full Access ports appear in the list.
Only ports configured as View Only ports appear in the list.
Only ports configured as No Access ports appear in the list.
All ports appear in the list.
Only ports configured as Full Access USB ports appear in the
list.
Only ports configured as Read Only USB ports appear in the list.
Only ports configured as No Access USB ports appear in the list.
All ports appear in the list.
Only ports configured as Permitted appear in the list.
Only ports configured as Restricted appear in the list.
All ports appear in the list.
Only ports configured as Permitted appear in the list.
Only ports configured as Restricted appear in the list.
Chapter 7. User Management
Description
149