Filters - ATEN CL5708IM User Manual

CL5708I / CL5716I User Manual

Filters

There are five filters at the top of the columns that allow you to expand or limit
the scope of the ports that are displayed in the Name column, as described in
the following table:
Filter
Name
Access All
Full
Access
View Only
No Access Only ports configured as No Access ports appear in the list.
Config All
Permitted
Restricted
130
To filter on the port name, key in the name then press Enter.
Only the ports whose names correspond to what you have keyed
in appear in the list.
Wildcards (? for single characters; * for multiple characters) and
the keyword or are supported. E.g., h*ds would return hands and
hoods; h?nd would return hand and hind, but not hard; h*ds or
h*ks would return hands and hooks.
All ports appear in the list.
Only ports configured as Full Access ports appear in the list.
Only ports configured as View Only ports appear in the list.
All ports appear in the list.
Only ports configured as Permitted appear in the list.
Only ports configured as Restricted appear in the list.
Description