Device Assignment; Assigning Device Permissions - ATEN RCM416 User Manual

Device Assignment

When a user logs in to the KVM over IP switch, the interface comes up with
the Port Access page displayed. All the ports that the user is permitted to access
are listed in the Sidebar at the left of the page. Access permissions for those
ports and the devices connected to them are assigned on a port-by-port basis
from the User or Group list on the Sidebar of the User Management page.

Assigning Device Permissions

To assign a device permissions to a user from the User's notebook, do the
following:
1. In the Sidebar User list, click the user's name
– or –
In the main panel, select the user's name and click Modify.
2. In the User notebook that comes up, select the Devices tab. A screen,
similar to the one below, appears:
Chapter 7. User Management
147