Installing Child Safety Seats at the Rear
Outboard Seating Positions (For lap and
shoulder belts with cinch tongues)
If you install a child safety seat in a rear
outboard seating position with a combination lap
and shoulder belt with cinch tongue, use the
following procedure:
1. Grasp the belt webbing below the tongue
and pull as much of the belt out of the
retractor as possible. Hold the belt out. See
Figure 1.
Pulling out belt webbing
NOTE: The belt webbing below the tongue is
the lap belt portion of the combination
lap and shoulder belt, and the belt
webbing above the tongue is the
shoulder belt portion of the
combination lap and shoulder belt.
80