Installing Child Safety Seats In The Front Passenger Seating Position; Pulling Out Belt Webbing - Ford 1996 Escort Manual

Installing Child Safety Seats in the Front
Passenger Seating Position (Canadian
2-door Hatchback vehicles)
For vehicles equipped with a dual locking mode
retractor, use the following procedure.
If you choose to install a child safety seat or
infant carrier in the front seating positions, move
vehicle seat as far back as possible.
1. Position the child seat in the center of the
passenger seat.
2. Pull down on shoulder belt, then grasp
shoulder belt and lap belt together. See
Figure 1.

Pulling out belt webbing

73