Heated Seats; Memory Seat, Mirrors And Steering Wheel - Chevrolet 2010 Corvette Owner's Manual

Hide thumbs Also See for 2010 Corvette:
Table of Contents

Advertisement

Heated Seats

On vehicles with heated seats, the buttons are located
on the center console.
The ignition must be on for this feature to work.
L
: Press to turn the seat on at the high setting.
Press again to turn it to the low setting
9
: Press to turn the system off.
Memory Seat, Mirrors and
Steering Wheel
On vehicles with the memory package, the controls are
located on the driver's door.
1: Saves the seating position for driver 1.
2: Saves the seating position for driver 2.
B
: Recalls the easy exit position.
2-4
The numbers on the back of the keyless access
transmitters correspond to the numbers on the memory
buttons.
To save seating positions in the memory:
1. Adjust the driver's seat, both outside mirrors, and
the telescopic steering column to a comfortable
driving position.
2. Press and hold button 1 until two beeps let you
know that the position has been stored in the
memory.
A second seating, mirror, and telescopic steering
column position can be set by repeating the above steps
and pressing button 2.
To recall a memory position:
On vehicles with an automatic transmission, press
and release the desired button.
If the vehicle is in P (Park), a single beep sounds
and the memory position is recalled after a
brief delay.
If the vehicle is not in P (Park), three beeps sound
and the memory position is not recalled.

Advertisement

Table of Contents
loading

Table of Contents