Chevrolet 2010 Corvette Owner's Manual page 297

Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information
label is attached to the center pillar (B-pillar)
of your vehicle. With the driver's door open,
you will find the label attached below the door
latch. This label shows the number of occupant
seating positions (A), and the maximum vehicle
capacity weight (B) in kilograms and pounds.
The Tire and Loading Information label also shows
the size of the original equipment tires (C) and
the recommended cold tire inflation pressures (D).
For more information on tires and inflation see
Tires on page 6-64 and Inflation - Tire Pressure
on page 6-72.
There is also important loading information on the
vehicle Certification label. It tells you the Gross
Vehicle Weight Rating (GVWR) and the Gross
Axle Weight Rating (GAWR) for the front and
rear axle. See "Certification Label" later in this
section.
Steps for Determining Correct Load Limit
Locate the statement "The combined weight of
1.
occupants and cargo should never exceed
XXX kg or XXX lbs" on your vehicle's placard.
Determine the combined weight of the driver
2.
and passengers that will be riding in your
vehicle.
Subtract the combined weight of the driver
3.
and passengers from XXX kg or XXX lbs.
5-29