Front Air Dam; Ignition Positions - Chevrolet 2010 Corvette Owner's Manual

Front Air Dam

The vehicle is equipped with a front air dam which has
minimal ground clearance.
Vehicles with the ZR-1 package also come with a
splitter made from carbon fiber.
WARNING:
{
The splitter in the ZR-1 is made from carbon fiber.
When damaged, the exposed edges can be very
sharp. A person could be injured by these sharp
edges. Use caution when washing the vehicle,
coming in contact with, or removing damaged
carbon fiber parts. See your dealer/retailer for
replacement.
Under normal operation, these components will
occasionally contact some road surfaces (speed bumps,
driveway ramps, etc.). This can be heard inside the
vehicle as a scraping noise. This is normal and does not
indicate a problem.
Use care when approaching bumps or objects on road
surfaces and avoid them when possible.
3-22

Ignition Positions

In order to shift out of P (Park), the vehicle must be
running or in Acc. mode and the regular brake pedal
must be applied.
/
(START): Press this button while your foot is on the
brake for an automatic transmission, or while pressing
in the clutch for a manual transmission, to start the
engine. If the vehicle is in OFF or Retained Accessory
Power (RAP) mode, the keyless access transmitter must
be inside the vehicle to start the engine.
The vehicle has an
electronic keyless ignition
with a pushbutton start.