Table of Contents
Advertisement
2. Adjust the seat to a comfortable driving position.
If your seat position changes, the HUD may need
to be re-adjusted.
3. Press the up or down arrows to center the HUD
image in your view.
The HUD image can only be adjusted up and down,
not side-to-side.
4. Press the dimmer control downward until the HUD
image is no brighter than necessary.
To turn HUD off, press and hold the (–) button until the
HUD display turns off.
If the sun comes out or it becomes cloudy, the HUD
brightness may need to be adjusted again using the
dimmer control. Polarized sunglasses could make the
HUD image harder to see.
The HUD information can be displayed in one of
six languages including English, Spanish, French,
German, Italian or Japanese. The speedometer can be
displayed in either English or Metric units.
To change the language and unit selections, see
"OPTION" under DIC Operation and Displays on
page 4-46.
Clean the inside of the windshield as needed to remove
any dirt or film that reduces the sharpness or clarity
of the HUD image.
To clean the HUD, spray household glass cleaner on a
soft, clean cloth. Wipe the HUD lens gently, then dry it.
Do not spray cleaner directly on the lens because the
cleaner could leak into the unit.
If the ignition is on and the HUD image cannot be seen,
check to see if:
•
Something is covering the HUD unit.
•
The HUD dimmer control is adjusted properly.
•
The HUD image is adjusted to the proper height.
•
Ambient light is low, in the direction the vehicle
is facing.
•
A fuse is blown. See Fuses and Circuit Breakers on
page 6-103.
Keep in mind that the windshield is part of the HUD
system. See Windshield Replacement on page 6-62.
4-19
Advertisement
Chapters
Table of Contents
