Table of Contents
Advertisement
Suspend Mode
Disable
10/20/30/40sec/
1 Min/2 Min/
4 Min/6 Min/
8 Min/10 Min/
20 Min/30 Min/
40 Min/1 Hr
PM Events
Award BIOS defines 7 PM events in the power management mode (Doze
&suspend). The user can initialize any PM Events to be Enable or Disable.
When the system detects all of the enabled events do not have any activity,
it will start the system Doze timer first if the Power Management is not
Disabled. Once the system Doze timer is timed out, it will process doze
power saving procedure by starting the system suspend timer. When the
suspend timer times out, all of the CPU clock will stop by dropping system
clock down to zero and remains this way until any one of the enabled events
occurrs.
VGA
LPT &COM
HDD & FDD
DMA/Master
Modem Ring Resume
During Disabled, the system will ignore any incoming call from the
modem or LAN. During Enabled, the system will boot up if there's an
incoming call from the modem or LAN.
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system, before this function will work.
System will never enter SUSPEND mode.
Defines the continuous idle time before the
system enters SUSPEND mode.
If any item defined in the options of "Power
Down & Resume Events" is enabled & active,
SUSPEND timer will be reloaded. When the
system has entered SUSPEND mode, any of the
items enabled in the "Power Down & Resume
Events" will trigger the system to wake up.
ON/OFF
NONE/LPT/COM/LPT&COM
ON/OFF
ON/OFF
3-20
®
Advertisement
Table of Contents
