Wake-Up On Lan; Cpu Thermal-Throttling; Resume By Alarm - MSI MS-6178E User Manual

Wake-Up on LAN

To use this function, you need a LAN add-on card which support power on
functions. It should also support the wake-up on LAN jumper (JWOL1).
Enabled
Disabled

CPU Thermal-Throttling

Select the CPU THRM-Throttling rate. The settings are: 25.0%, 37.5%, 50.0%,
62.5%, 75.0%, 87.5%.

Resume by Alarm

This function is for setting date and time for your computer to boot
up. During Disabled, you cannot use this function. During Enabled, choose
the Date and Time Alarm:
Date(of month) Alarm
Time(hh:mm:ss) Alarm
Note: If you have change the setting, you must let the system boot up
until it goes to the operating system, before this function will work.
Reload Global Timer events are I/O events whose occurrence can prevent the
system from entering a power saving mode or can awaken the system from
such a mode. In effect, the system remains alert for anything which occurs to
a device which is configured as Enabled , even when the system is in a power
down mode.
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ[A-D] #
Wake up on LAN supported.
Wake up on LAN not supported.
You can choose which month the
system will boot up. Set to 0, to boot
every day.
You can choose what hour, minute and
second the system will boot up.
3-23
®