Required Items - Yamaha QL5 Manual

QL5/QL1
SERVICE CHECK PROGRAM
1. Preparation
1-1.

Required items

• Object to be checked QL5/QL1 itself
• DOS/V PC
(with P-200MHz or more, Windows 2000,Windows XP, Ethernet port)
• MY16-EX check jig
(Not necessary if not executing the SLOT check.)
• Ethernet (CAT5e) Straight cable
• CANNON (AES/EBU) cable
• BNC (Word Clock) cable
• MIDIcable
• USB memory
• Tester (to measure the voltage of LAMP)
• GPI inspection jig
• Rio3224-D or Rio1608-D
• Service check for PC application
Load the latest program shown in the following table into QL5/QL1 itself and PC before executing the service check.
For the updating procedure, refer to the "UPDATING FIRMWARE" section on page 154.
* The program can be downloaded from the YSISS Home Page.
• QL Firmware v1.02f
Generic term
MAIN FIRMWARE
PC application for Service Check
DME-N Network Driver
126
FILE name
MQLP1_02.PGM
¥TestProgram¥Factory Test PC App
¥DiagQL1_service.exe
¥DiagQL5_service.exe
¥TestProgram
¥DME_Networkdrv_v122
: 1 unit
: 2 pcs.
: 3 pcs.
: 1 pc.
: 1 pc.
: 1 pc.
: 1 pc.
: 1 pc.
: 1 pc.
: 1 pc.
Version Writing procedure [object]
V1.02
Generalcheck [USB storage]
V1.02
V1.2.2
CPU circuit board check/
[PC for checking]
[PC for checking]