Cisco Catalyst 9500 Manual page 302

Displaying OBFL Information
Command
show logging onboard RP active environment [ continuous
| detail | summary ]
Device# show logging onboard RP active environmentt
show logging onboard RP active message [ continuous |
detail | summary ]
Device# show logging onboard RP active message
show logging onboard RP active counter [ continuous |
detail | summary ]
Device# show logging onboard RP active counter
show logging onboard RP active temperature [ continuous
| detail | summary ]
Device# show logging onboard RP active temperature
show logging onboard RP active uptime [ continuous | detail
| summary ]
Device# show logging onboard RP active uptime
show logging onboard RP active voltage [ continuous | detail
| summary ]
Device# show logging onboard RP active voltage
show logging onboard RP active status [ continuous | detail
| summary ]
Device# show logging onboard RP active status
Table 21: Commands for Displaying OBFL Information
Command
show onboard switch switch-number clilog
Device# show onboard switch 1 clilog
show onboard switch switch-number environment
Device# show onboard switch 1 environment
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
288
Troubleshooting the Software Configuration
Purpose
Displays the UDI information for a module
and for all the connected FRU devices: the
PID, the VID, and the serial number.
Displays the hardware-related messages
generated by a module.
Displays the counter information on a module.
Displays the temperature information of a
module.
Displays the time when a module start, the
reason the module restart, and the length of
time that the module have been running since
they last restarted.
Displays the system voltages of a module.
Displays the status of each OBFL application
of a module.
Purpose
Displays the OBFL CLI commands that were
entered on a standalone switch or the specified
stack members.
Displays the UDI information for a standalone
switch or the specified stack members and for
all the connected FRU devices: the PID, the
VID, and the serial number.