Cisco Catalyst 9500 Manual page 27

Administering the Device
2. configure terminal
3. clock summer-time zone date date month year hh:mm date month year hh:mm [offset]]
4. clock summer-time zone recurring [week day month hh:mm week day month hh:mm [offset]]
5. end
6. show running-config
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3 clock summer-time zone date date month year hh:mm
date month year hh:mm [offset]]
Example:
Device(config)# clock summer-time PDT date
10 March 2013 2:00 3 November 2013 2:00
Step 4 clock summer-time zone recurring [week day month
hh:mm week day month hh:mm [offset]]
Example:
Device(config)# clock summer-time
PDT recurring 10 March 2013 2:00 3 November 2013
2:00
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
Configuring Summer Time (Daylight Saving Time)
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Configures summer time to start and end on specified days
every year.
Configures summer time to start and end on the specified
days every year. All times are relative to the local time zone.
The start time is relative to standard time.
The end time is relative to summer time. Summer time is
disabled by default. If you specify clock summer-time
zone recurring without parameters, the summer time rules
default to the United States rules.
If the starting month is after the ending month, the system
assumes that you are in the southern hemisphere.
• zone Specifies the name of the time zone (for
example, PDT) to be displayed when summer time is
in effect.
• (Optional) week Specifies the week of the month (1
to 4, first, or last).
• (Optional) day Specifies the day of the week (Sunday,
Monday...).
13