Table of Contents
Advertisement
Basic operation
The operations in the setup menu are performed with the operation buttons after calling up the
setup menu on the connected video monitor.
The description below explains how to operate the setup menu basically.
Screenshots of WV-CW630S/G are shown as an example.
Screenshot 1
Hold down the [SET] button for about 2
seconds to call up the top screen of the setup
menu.
MODEL
CAMERA ID
CAMERA
SYSTEM
BACK-FOCUS
SPECIAL
LANGUAGE
END
Screenshot 2
The setup mode changes to "ENABLE", and
the setup menu becomes ready to be set.
MODEL
CAMERA ID
CAMERA
SYSTEM
BACK-FOCUS
SPECIAL
LANGUAGE
END
34
WV-CW630 SERIES
OFF
SETUP DISABLE
WV-CW630 SERIES
OFF
SETUP ENABLE
Step 1
Press the [UP] or [DOWN] button to move the
cursor to "END".
Step 2
Press the [RIGHT] button to move the cursor to
"SETUP", and press the [SET] button to
change the setup mode from "DISABLE" to
"ENABLE".
Step 3
Move the cursor to the item to be set, and
press the [SET] button.
Advertisement
Table of Contents
