Table of Contents
Advertisement
w Engage the attachment mounting screw
of the camera with the camera mounting
hole of the attachment plate and rotate the
camera in the direction of the arrow to the
"LOCK" position to secure the camera to
the attachment plate without any backlash.
e Connect the power cord and the video
output cable at the side of the camera
mount bracket. (+ page 20)
Apply waterproof treatment to the con-
nected section. (+ page 22)
r Accommodate the connected cables
inside the cable guide of the camera
mount bracket.
Important:
• To prevent the cables from being caught
when the cover is attached, keep the
cables inside the cable guide.
26
Projection
Cable guide
Connected cable
Make cable
connections.
Cable guide
Advertisement
Table of Contents
