Panasonic WV-CW474FE Operating Instructions Manual

Colour cctv camera

Advertisement

Quick Links

please read these instructions carefully and save this manual for future use.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is interned to alert
the user to the presence of
uninsulated "dangerous volt-
age" within the product's enclo-
sure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
The exclamation point within
an equilateral triangle is intend-
ed to alert the user to the pres-
ence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
PREFACE
Panasonic's WV-CW474FE colour digital camera introduces a new level of high picture qual-
ity and high resolution through the use of a 1/3-inch interline transfer CCD image sensor
having 752 horizontal pixels (picture elements), and digital signal processing LSIs. This
model offers cutting-edge technology for advanced video surveillance.
PRECAUTIONS
1. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user-serviceable parts inside. Ask qualified service personnel for servic-
ing.
2. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage.
3. The following installation should be made by qualified service personnel or
system installers.
4. Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. When the dirt is hard to remove, use a
mild detergent and wipe gently. Then wipe off the remaining detergent with a dry cloth.
5. Clean the CCD faceplate with care.
Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cotton
tipped applicator and ethanol.
6. Never face the camera towards the sun.
Do not aim the camera at bright objects. Whether the camera is in use or not, never
aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may
be caused.
Model No.
Before attempting to connect or operate this product,
Colour CCTV Camera

Operating Instructions

WV-CW474FE
N0502-0
3TR001106AAA
We declare under our sole responsibility that the product
to which this declaration relates is in conformity with the
standards or other normative documents following the
provisions of Directives EEC/73/23 and EEC/89/336.
Vi deklarerar härmed värt fulla ansvar för att den produkt
till vilken denna deklaration hänvisar är i överensstäm-
melse med standarddokument, eller andra normativa
dokument som framstölls i Direktiv 73/23/EEC och 89/
336/EEC.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota
tämä ilmoitus koskee, noudattaa seuraavia standardeja
tai muita ohjeellisia asiakirjoja, jotka noudattavat direkti-
ivien 73/23/EEC ia 89/336/EEC. säädöksiä.
Vi erklærer oss alene ansvarlige for at produktet som
denne erklæringen gjelder for, er i overensstemmelse
med følgende normer eller andre normgivende doku-
menter som fælger bestemmelsene i direktiven 73/23/
EEC og 89/336/EEC.
Wij verklaren als enige aansprakelijke, dat het product
waarop deze verklaring betrekking heeft, voldoet aan de
volgende normen of andere normatiefve dokumenten,
overeenkomstig de bepalingen van Richtlijnen 73/23/
EEC en 89/336/EEC.
Vi erklærer os eneansvarlige for, at dette produkt, som
denne deklaration omhandler, er i overensstemmelse
med den følgende standarder eller andre normative
dokumenter i følge bestemmelserne i direktivene 73/23/
EEC og 89/336/EEC.
The serial number of this product may be found
on the top of the unit.
You should note the serial number of this unit
in the space provided and retain this instruction
as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
Printed in Japan
N 19

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic WV-CW474FE

  • Page 1: Operating Instructions

    To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. PREFACE Panasonic's WV-CW474FE colour digital camera introduces a new level of high picture qual- ity and high resolution through the use of a 1/3-inch interline transfer CCD image sensor having 752 horizontal pixels (picture elements), and digital signal processing LSIs.
  • Page 2: Major Operating Controls And Their Functions

    7. Do not operate the camera beyond the specified temperature, humidity or power source ratings. Use the camera at temperatures within –10 °C to +50 °C (14 °F - 122 °F), and humidity below 90 %. The input power source is 24 V AC. 8.
  • Page 3: Prevention Of Blooming And Smear

    r AZIMUTH (Angle adjuster) Shoots in a straight-angle field of view when aiming at an object in a slanting direction even if the tilt angle has been set. t Zoom lock lever Fixes the zoom position. y Focus lock lever Fixes the focus position.
  • Page 4: Camera Setup Menu

    SETUP 1. CAMERA SETUP MENU This camera utilizes an on-screen user setup menu. • Opening the Setup Menu ** CAM SET UP ** Press and hold down I(S) for 2 seconds or CAMERA ID more. SHUTTER ON(DNR-H) SENS UP The CAM SET UP menu appears on the monitor SYNC as shown at right.
  • Page 5: Setting Procedures

    2. Move the CAMERA ID to the desired posi- tion by pressing I(L) / I(R) / I(U) / I(D). WV-CW474FE 3. Press I(S) to fix the position of the CAMERA ID. The mode returns to the pre- vious CAMERA ID menu.
  • Page 6 SETTING PROCEDURES 2-2. ALC Mode with SUPER-D2 OFF 1. Move the cursor to SUPER-D2 and select OFF. The MASK SET appears on ** ALC CONT ** the menu. BACK LIGHT COMP SUPER-D2 MASK SET LEVEL ...I..2. Move the cursor to MASK SET and press I(S).
  • Page 7: Synchronization Setting (Sync)

    6. Synchronization Setting (SYNC) Select one of the three sync source modes. The priority is as follows. (1) Multiplexed Vertical Drive (VD2) (Highest priority) (2) Line-lock (LL) (3) Internal Sync (INT) (Lowest priority) 6-1. Line-lock Sync Mode (LL) The line-lock mode has a submenu for line-lock vertical phase adjustment. If the camera installation is relocated, check the vertical phase adjustment again since the AC line phase may be different.
  • Page 8 Because the alarm signal is multiplexed on the video signal, it may be mistakenly inter- preted by other video equipment as a time code signal. Therefore, when the camera is not used in a Panasonic Intelligent CCTV System, select OFF to prevent the above from occurring.
  • Page 9 9-5. Electronic Zoom (EL-ZOOM) 1. Move the cursor to EL-ZOOM. 2. Select ON or OFF using I(L) or I(R). The factory default setting is OFF. ON: x2 electronic zoom is available with the ZOOM switch on the controller. OFF: The electronic zoom function is disabled. 3.
  • Page 10: Specifications

    Specifications are subject to change without notice. STANDARD ACCESSORIES Tamperproof screw bit ..............1 pc. OPTIONAL ACCESSORIES WV-CW1CE Clear Dome Cover WV-Q112E Camera mounting bracket Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic.co.jp/global/ 2002 © Matsushita Communication Industrial Co., Ltd. All rights reserved...

Table of Contents