Taking out the spare tire
Assembling the jack handle.
1
Remove the jack handle end, jack handle extensions and wheel nut
wrench from the tool bag and assemble by following these steps.
1
Loosen the bolts using a
screwdriver.
Assemble the jack handle
2
end, jack handle extensions
and wheel nut wrench and
tighten the bolts.
Check that the bolts are firmly
tightened.
Insert the jack handle extension
2
into the lowering screw.
1
Lower
Raise
2
Place a rag under the jack han-
dle extension to protect the
bumper.
7-2. Steps to take in an emergency
435
7