Toyota HILUX Owner's Manual page 411

410
6-3. Do-it-yourself maintenance
■
Replacing the following bulbs
If any of the lights listed below has burnt out, have it replaced by
your Toyota dealer.
● Side turn signal lights (mirror-mounted type) (if equipped)
● High mounted stoplight (if equipped)
■
When installing the rubber cover of the headlight
Ensure the rubber cover is securely attached.
1 Fit the rubber cover outer circumfer-
ence in firmly.
2 Fit the rubber cover around the light
bulb in until the light bulb plug can be
seen.
■
LED lights
The high mounted stoplight consists of a number of LEDs. If any of the LEDs
burn out, take your vehicle to your Toyota dealer to have the light replaced.
■
Condensation build-up on the inside of the lens
Temporary condensation build-up on the inside of the headlight lens does not
indicate a malfunction. Contact your Toyota dealer for more information in the
following situations:
●
Large drops of water have built up on the inside of the lens.
●
Water has built up inside the headlight.