258
5-8. Using an external device
■
About iPod
●
"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an elec-
tronic accessory has been designed to connect specifically to iPod, iPhone,
or iPad, respectively, and has been certified by the developer to meet Apple
performance standards.
●
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of this acces-
sory with iPod, iPhone, or iPad may affect wireless performance.
●
iPad, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks
of Apple Inc., registered in the U.S. and other countries. Lightning is a trade-
mark of Apple Inc.
■
iPod cover art
●
Depending on the iPod and songs in the iPod, iPod cover art may be dis-
played.
●
This function can be changed to on/off. (→P. 238)
●
It may take time to display iPod cover art, and the iPod may not be operated
while the cover art display is in process.
●
Only iPod cover art that is saved in JPEG format can be displayed.
■
iPod functions
●
When an iPod is connected and the audio source is changed to iPod mode,
the iPod will resume play from the same point in which it was last used.
●
Depending on the iPod that is connected to the system, certain functions
may not be available. If a function is unavailable due to a malfunction (as
opposed to a system specification), disconnecting the device and recon-
necting it may resolve the problem.