Descaling - Smeg SO6302S3PX Manual

minimum of 2:30 hours to maximum of 3:30
hours.
Recommended pyrolytic cycle duration:
• Light dirt: 2:30.
• Moderately dirty: 3:00.
• Heavy dirt: 3:30.
3. Press the button to confirm.
It is not possible to start the pyrolytic
cycle if the temperature probe (if
available) is plugged in.
4. Two minutes after the Pyrolytic cycle starts,
the indicator light comes on to indicate
that the door is locked by a device that
prevents the door from being opened.
It is not possible to select any function
once the door lock device has been
activated.
At the end,
and a buzzer sounds.
5. Turn the function knob to position 0 to exit
the function.
The door is locked until the temperature
inside the oven cavity returns to a safe
level.
During the Pyrolytic cycle the fans
produce a more intense level of noise
due to a greater rotation speed. This is
an absolutely normal operation,
intended to provide more effective heat
dispersal. At the end of the pyrolytic
cycle, the fans will continue to operate
for long enough to avoid overheating
the walls of adjacent units and the front
of the oven.
During the first Pyrolytic cycle,
unpleasant odours may occur due to
the normal evaporation of oily
manufacturing substances. This is an
absolutely normal phenomenon which
disappears after the first pyrolytic cycle.
If the pyrolytic cycle gives unsatisfactory
results at minimum duration, it is
recommended to set a longer time for
subsequent cleaning cycles.
914779559/B
is displayed and flashes
Programmed pyrolytic cycle
It is possible to program the Pyrolytic cycle start
time like all other cooking functions.
1. After selecting the Pyrolytic function, press
button.
The indicator light
1. Turn the temperature knob to set the function
end time.
2. Press the button to confirm.
The appliance waits until the set start time to start
the Pyrolytic function.
It is not possible to select any function
once the door lock device has been
activated. It is always possible to switch
the appliance off, by turning the function
knob to the 0 position.
End of pyrolytic function
1. Turn the function knob to position 0 to exit
the function.
2. Open the door and collect the residue
deposited inside the oven cavity with a
damp microfibre cloth.
We recommend wearing rubber gloves
for these operations.
For easier manual cleaning of parts that
are difficult to reach, we recommend
removing the door.

Descaling

The presence of scale due to lack of
descaling can compromise correct
operation of the appliance in the long
term.
Periodically the display will show the request to
perform the boiler descaling procedure.
CLEANING AND MAINTENANCE - 91
flashes on the display.