Table of Contents
Advertisement
Sign On and Set System Values
and select Systems management->Basic system operations—>Analyze and report
system problems. Then return here and continue with the next step.
e. Press Enter. The Change Password display appears.
f. Type QSECOFR in the Current password field.
g. Type a new password in the New password field, and the New password (to verify) field. The
new password must follow these rules:
v Start with an alphabetic character
v Be up to 10 characters in length
v Contain any combination of alphabetic characters and numeric characters. Some of the
special characters are supported as well.
Be sure to write the new password down and keep it in a safe place.
h. The Work with Software Agreements display appears.
Type 5 to display and accept the software agreements for the licensed programs that you want
to accept. Software agreements for the Licensed Internal code and the Operating System/400
must be accepted before the server can be used. If you do not accept these agreements, the
server must be powered down. If you decline acceptance of the software agreements for the
other licensed programs, follow the instructions on how to remove these from the server.
i. Did the Main Menu appear?
MAIN
Select one of the following:
1. User tasks
2. Office tasks
3. General system tasks
4. Files, libraries, and folders
5. Programming
6. Communications
7. Define or change the system
8. Problem handling
9. Display a menu
11. iSeries Access tasks
90. Sign off
Selection or command
===> _____________________________________________________________________
__________________________________________________________________________
F3=Exit
F4=Prompt
F23=Set initial menu
(C) COPYRIGHT IBM CORP. 1980, 2003.
Yes
No
Informational messages may appear on the Display Messages display. Press Enter.
↓
Did the Main Menu appear?
Yes
↓
__ 3. This step contains instructions on how to set the system break mode, date, and time.
a. Type chgmsgq qsysopr *break sev(65)
2
iSeries Setting Up Your Twinaxial System V5R3
OS/400 Main Menu
F9=Retrieve
F12=Cancel
No
Go to theiSeries Information Center, SK3T-4091-04 CD or the Web site
http://www.ibm.com/eserver/iseries/infocenter
and select Systems management->Basic system operations—>Analyze and
report system problems. Then return here and continue with the next step
System: XXX
F13=Information Assistant
Advertisement
Table of Contents
