Table of Contents
Advertisement
Windows
Power Windows
The controls are located next to the console shift lever.
Tap the controls forward or rearward to raise or lower
the windows in increments. To express
window, press the control rearward for about one second
and then release. If you want to stop the window as it is
lowering, tap the control. Pressing the control forward
for about one second and then releasing it will
-
express
close the window.
2-32
When you stop your vehicle and turn the ignition key
to LOCK, you can still use the power windows. The
electrical power to operate the windows will not shut off
until the driver's door is opened
to this feature. As soon as a door is opened, power
window movement will stop immediately.
Programming the Power Windows
If the battery on your vehicle has been recharged,
disconnected or is not working, you will need to
reprogram each power window for the express
close features to work. Before reprogramming, you will
need to replace or recharge your vehicle's battery.
To program each window, follow these steps:
1. Close all doors.
2. Press and hold the power window control until the
3. Hold the power window control until the window is
-
open the
4. Continue holding the control down for
The window is now programmed. Repeat the process for
each window.
window has fully opened.
fully closed.
approximately five seconds after the window is
completely up.
yellowblue
--
there is no time limit
-
open and
Advertisement
Table of Contents
