Hide thumbs Also See for CTS:

Advertisement

Introduction . . . . . . . . . . . . . . . . . .
Overview . . . . . . . . . . . . . . . . . . . . . . . 3
Radio . . . . . . . . . . . . . . . . . . . . . . .
AM-FM Radio . . . . . . . . . . . . . . . . . 11
Satellite Radio . . . . . . . . . . . . . . . . 16
Audio Players . . . . . . . . . . . . . .
CD/DVD Player . . . . . . . . . . . . . . . 17
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Hard Drive Device (HDD) . . . . . 27
Auxiliary Devices . . . . . . . . . . . . . . 32
Navigation . . . . . . . . . . . . . . . . . .
Using the Navigation
System . . . . . . . . . . . . . . . . . . . . . . 35
Maps . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Navigation Symbols . . . . . . . . . . . 40
Destination . . . . . . . . . . . . . . . . . . . . 44
Configure Menu . . . . . . . . . . . . . . . 57
Global Positioning
System (GPS) . . . . . . . . . . . . . . . 65
Vehicle Positioning . . . . . . . . . . . . 65
. . . . . .
Problems with Route
3
Guidance . . . . . . . . . . . . . . . . . . . . 66
3
Service . . . . . . . . . . . . . . . . . . . . . . 67
Ordering Map DVDs . . . . . . . . . . 67
11
Database Coverage
Explanations . . . . . . . . . . . . . . . . . 67
Voice Recognition . . . . . . . . . .
17
Speech Recognition . . . . . . . . . . . 68

Trademarks and License

Agreements . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . i-1
35
68
70

Advertisement

Table of Contents
loading

Summary of Contents for Cadillac CTS

  • Page 1: Table Of Contents

    ..Problems with Route Guidance ....66 Introduction ....If the System Needs Service .
  • Page 3 Keep this manual with the owner Emblem, CADILLAC, the CADILLAC suivante: manual in the vehicle, so it will be Crest & Wreath, and the name CTS there if it is needed. If the vehicle is Helm, Incorporated are registered trademarks of sold, leave this manual in the P.O.
  • Page 4 Set up your phone numbers in Keeping your eyes on the road and Use the navigation system to: advance so they can be called your mind on the drive is important Plan a route. easily with the press of a single for safe driving.
  • Page 5 evaluate whether following the When the navigation system is Each time the vehicle is started and system's directions is safe and legal turned on, a screen may appear the navigation system is turned on, for the current conditions. with the information below, and you the Caution screen may appear.
  • Page 7 S. FAV (Favorite). A. VOL/ (Volume/Power Knob). Up to 36 preset stations can be (Navigation Screen B. TUNE/TONE. stored. AM, FM, and XM Up/Down). (Dimming Change Button). (if equipped) can be mixed. To store presets: (Play/Pause). To change the language of the 1.
  • Page 8 5. The Street name category is 6. Enter the house number. The automatically selected for entry. system displays the house Start entering the street name. number range that is available for the street. It is recommended that The vehicle must be in P (Park) to directional information or street 7.
  • Page 9 6. Press the Go screen button. The 5. Press the Add screen button system calculates the route. from the map screen to add the To set a destination by entering a current final destination to the Point of Interest (POI): 7.
  • Page 10 See Voice Volume under for more Guidance is canceled once you information. arrive at the final destination. To These destinations are available for cancel guidance prior to arrival at selection while driving. the final destination: If the panel or the display is stained, 1.
  • Page 11 1. Press to display the full audio screen. 2. Press to switch between AM, FM, XM (if equipped), CD, DVD, HDD, and AUX (auxiliary input), or press the screen 1. Press to turn the audio system button. See on and off. (if equipped), 2.
  • Page 12 Press to refresh the list of AM or FM stations. Functions shown below only applies to XM (if equipped). Press to remove the currently displayed category. Press to restore a category that was just removed Press to restore all categories that were removed. In the audio split screen, the name of the station or channel displays.
  • Page 13 Press the + sign to increase or decrease This feature allows storage of up to the midrange. 36 preset stations. You can mix AM, Press the + or sign to FM, and XM (if equipped). To increase or decrease the bass. store presets: 1.
  • Page 14 DSP settings: 5.1 Surround sound Press the CONFIG control button to processing is available for DVD-A/ enter the menu screen, then press Adjusts the audio to DVD-V sources that were recorded CONFIG repeatedly until Radio is normal mode. This provides the best in 5.1 surround.
  • Page 15 To use AudioPilot: Press (pause) to stop hearing ® Bose equipped the information through the 1. Press the CONFIG control ® vehicles include Bose AudioPilot speakers. During this pause time, button to enter the menu screen, noise compensation technology. timeshift keeps recording. then press CONFIG repeatedly When turned on, AudioPilot until Radio is selected or press...
  • Page 16: Radio

    The RDS system is always on. Satellite Radio has a wide When information is broadcast from variety of programming and The audio system has a Radio Data the current FM station, the station commercial-free music, System (RDS). RDS features are name or call letters display on the coast-to-coast, and in digital-quality available for use only on FM...
  • Page 17 The player is only compatible with CDs or DVDs of the appropriate region code that is printed on the jacket of most CDs and DVDs. The CD/DVD slot is compatible The player can be used for CD, with most audio CDs, CD-R, MP3, and DVD audio and DVD CD-RW, DVD-Video, video.
  • Page 18 There are three ways to play 1. Press to pause the CD, the 1. Press the right arrow to go to the a DVD: pause symbol displays. This next track. button will then change to the Once a DVD is inserted, the 2.
  • Page 19 Use these arrow buttons to move Once a DVD starts to play, the 1. Press this screen button to around the DVD menu. menu options automatically appear. remove all menu options from To display the menu choices while a the display. Press to select the DVD is playing in full screen, press highlighted option.
  • Page 20 Press to display the first menu of the DVD. This button is 1. Press to display the audio 1. Press to stop play of the DVD. not available on all DVDs. stream number and to change 2. Press (play/pause) to the language heard.
  • Page 21 Press to display the DVD From the DVD Press English, Setup screen. The DVD Setup Setup screen, press to change French, or Spanish to change the screen allows you to change the audio, subtitle, and menu language of the menus. initial settings;...
  • Page 22: Cd/Dvd Player

    Press to make the navigation If the CD/DVD is not playing screen background brighten. correctly, for any other reason, try a If Disc Read Error displays and/or known good disc. From the DVD Setup the CD/DVD comes out, it could be screen, press to turn autoplay on or If any error occurs repeatedly or if for one of the following reasons:...
  • Page 23 ID3 tag information is displayed by the radio if it is available. The The root directory is treated as a When the CD contains only radio will display a filename, folder. If the root directory has compressed files, the files are song name, artist name, album compressed audio files, the located under the root folder.
  • Page 24 Tracks are played in the following The song name that displays is the With the ignition on, insert a MP3 order: song name contained in the file. CD partway into the slot, label side If the song name is not present in up.
  • Page 25 If viewing a map screen, press the MP3 screen button. The display 1. Press to pause the CD, the 1. Press and hold to fast forward splits between the audio screen and pause symbol displays. This quickly through a track selection. the map screen.
  • Page 26 : Press to view the folders : Press to view the 3. If either arrow is pressed more that have been stored on the albums that have been stored on than once, the player will Disc. Select a folder name to the Disc.
  • Page 27: Mp3

    To record selected tracks: 1. Load a CD. To record all tracks: With a hard drive device you are able to record songs from your CD 2. Press the Track List screen 1. Load a CD. player or a mass media storage button, located in the middle of To record an audiobook from a device connected by a USB...
  • Page 28 While recording a CD to the HDD, 3. A confirmation window displays. 4. Press the REC control button. if the system is turned off, the Press Yes to record all tracks; 5. A confirmation window displays. recording process stops. When the press No to cancel the Press Yes to record this track;...
  • Page 29 For tracks recorded from CD audio discs to the HDD, it displays 1. Press this button for playback of 1. Select the left or right arrow to Multi Hit on the screen when the any media source that had been go to the previous or next music information of two or more currently playing at the point of...
  • Page 30 Once a song has been selected Once a song has been selected from this category, the AutoPlay from this category, the Album 1. Press to view the playlists that appears in the center button on the appears in the center button on the have been stored on the HDD.
  • Page 31 Audio books are only available through the Genre menu. A CD can be copied and then If the CD is ejected before the 1. Press to view the genres that listened to or a CD can be recording recording process has completed, have been stored on the HDD.
  • Page 32 If a device is connected and you are listening to another source (FM, XM The system is able to play back The navigation system has an (if equipped), CD, MP3, etc.), press audio-book content downloaded auxiliary input jack located in the the AUDIO control button then press from www.audible.com.
  • Page 33 Music can be played directly from If the content of a USB device is the USB device and controlled chosen to be copied, these media through the radio's MP3 control files are copied to the hard drive. An iPod can be controlled using the functions and the Music Navigator.
  • Page 34 * For proper operation, make sure Use the radio Menu/Select knob to the iPod has the latest firmware bring up the iPod Menu and select When a CDDA is recorded from a ® from Apple . The iPod firmware can Songs, Artists, Albums, Playlists CD to the HDD, the music be updated using the latest iTunes...
  • Page 35 1. Turn the ignition on. The following control buttons are located on the navigation system: 2. Press to turn the system on. 3. Insert the update disc partway This section presents basic into the slot, label side up. The 1. Press to turn the system on information needed to operate the player pulls it in.
  • Page 36 Press to access Press to view the preset stations. See your vehicle's current position on 1. Turn to go to the next or for more the map screen. Each press of this previous radio station/channel, information. key cycles through Full Map and the track, or chapter.
  • Page 37 Press to Press to play and access the Route screen to plan a to pause Timeshift, CD, MP3, DVD, Letters of the alphabet, symbols, destination. If route guidance is HDD, USB, iPod. See punctuation, and numbers, when active, press this key to access the available, display on the navigation Route screen.
  • Page 38 To make name selections easier, 7. The disc is automatically ejected the system only highlights the after the map database update Your dealer installed the map characters that can follow the last is completed. The system database information on the HDD. one entered.
  • Page 39 When handling the DVD map disc, The scale of view on the map can be careful of the following: be adjusted. Also, the map moves automatically based on the direction Handle the disc very carefully to the vehicle is being travelled. avoid contamination or flaws.
  • Page 40: Destination

    When scrolling on the map, the destination. Once a waypoint has system displays the address of the been added, the points can be scroll symbol location. edited or deleted. You can use the scroll feature on the map to set a destination. See From Map under Destination for The destination symbol appears on more information.
  • Page 41 Select this screen symbol to switch between North Up, Heading Up, and 3 D modes. This north up symbol indicates the map with North Up, known as North Up mode. While in North Up mode, This symbol only appears when The distance and time to destination the vehicle icon follows the north time is not available.
  • Page 42 This heading up symbol indicates the map with the vehicle travel direction up, known as Heading Up mode. While in Heading Up mode, the direction the vehicle is traveling will always be at the top of the map screen. The shaded triangle The No GPS symbol appears when indicates the North direction.
  • Page 43 Press to change one of the Press this screen button, next current POI categories. Press the to the desired POI, to make this POI Edit screen button, select the POI a destination or a waypoint. category to be changed, then select Select a POI name to receive the new category.
  • Page 44 If having trouble finding a city or a street name: Press the DEST control button to Enter the street name first access the Select Destination instead of the city name, or vice screen. From this screen, select versa. from several options to plan a route by entering destinations.
  • Page 45 While the Street name 3. The Street category is 9. Press the Start Guidance screen category is empty, there is automatically selected for entry. button. The route is now ready a Last 5 Streets screen Start entering the street name. to be started.
  • Page 46 While the Street name 4. Start entering the street name. 8. Select the route preference category is empty, there is (Fastest, Shortest, or Easy). The It is recommended that a Last 5 Streets screen system highlights the route. directional information or street button that displays the last 9.
  • Page 47 5. Start entering the street name. 6. Select the street name. Do not enter directional 7. Once a street has been information or street type, and selected, the numeric keyboard use the Space screen button displays, allowing entry of the between street or city names.
  • Page 48 6. Select the route preference 4. Select the Name / screen (Fastest, Shortest, or Easy). The button and start entering the system highlights the route. name or select the 0 9 screen 1. Press the DEST control button. button to enter the phone 7.
  • Page 49 8. Press the Start Guidance screen 6. A confirmation screen displays button. The route is now ready with the POI information. If the to be started. POI information is correct, select the Go screen button. The See Getting Started on Your system calculates the route.
  • Page 50 3. Press the Go screen button, address is found, it will be shown on located next to the destination. your navigation system's screen The system calculates the route. along with the buttons described ® OnStar Destination Download below. 4. Select the route preference (if equipped) is a service available (Fastest, Shortest, or Easy).
  • Page 51 Select Call, the navigation Important Notes regarding OnStar system initiates a call to your Destination Download: If an OnStar destination is destination with your Bluetooth downloaded while route guidance is If the navigation system is phone (if available) or OnStar not active, the navigation system turned off when the destination Hands-Free Calling, if equipped...
  • Page 52 If the map screen is used to show Once a destination has been destination, it will have map screen entered there are several functions capabilities such as Go, Mark, that can be performed. Press the Zoom, Scroll, etc. The address is DEST to access the Route screen.
  • Page 53: Guidance

    Press to fast reverse scroll to the start point. Press this screen button This button displays once the from the Route screen, then select reverse scroll button has been to detour 2, 5, 10, 20, or 40 km selected. (1, 3, 5, 15, or 25 miles) around the current route.
  • Page 54 To add a waypoint: 3. The system displays a pop-up confirmation message. Press 1. Press the DEST control button. Yes to delete the waypoint; 2. Press the Add screen button. press No to cancel this This button only appears if a operation.
  • Page 55 3. Press and hold one of the six screen buttons at the bottom of the screen until the text within This feature allows addition or To store the current final destination the button changes. changes to one of six preset to the address book, press the Add The name appears in that preset destinations.
  • Page 56 4. Press Name and use the alpha To change the map icon of an keyboard to edit or add address book entry: the name. 1. Press the DEST control button. 5. Press the OK screen button to 2. Press the Address Book screen save the changes.
  • Page 57 5. The system asks that you state 3. Press the Delete All screen the name. You will have button. A confirmation window Press the CONFIG control button to two seconds to state the name. displays. Select Yes to cancel; enter the Menu options, then press The system responds back with No to cancel this operation.
  • Page 58: If The System Needs

    Press the + (plus) or (minus) screen buttons Press the Route Preference screen to increase or to decrease the button to change route options volume of all voice categories. when the system calculates a route. Press to turn The system voice instructions on and off while avoids major roads when calculating traveling on a planned route.
  • Page 59: Service

    Traffic flow information (rate of speed data). Flow data might not Press the Back Track screen button be available in all markets. to turn recording and displaying on The navigation system might have Traffic information is delivered to the and off or to delete the path being an XM NavTraffic receiver.
  • Page 60 Green indicates that the traffic 3. Press the Display Traffic traffic conditions along the planned condition is far away. Information button. This button route. Not all traffic conditions may highlights when it is active. be reported in the list. Yellow indicates that a minor traffic condition in the Selecting Use Traffic Information To view the traffic condition location...
  • Page 61 The vehicle must be on Route Guidance and the traffic condition must be on the route for the Avoid feature to work. Press the Avoid screen button next to the traffic condition to be avoided. The current route updates to remove the area with the traffic condition from the route.
  • Page 62 automatically calculates a new route. This option only becomes available when the traffic icon is red. Selecting Use Traffic Information for Guidance enables the system to XM NavTraffic (if equipped) show a pop-up screen notifying of a information may not be provided for possible quicker route, when driving the alternate route, depending on Traffic jam.
  • Page 63 Lane Narrows. Road condition. Road work. Construction. Road visibility. Press the CONFIG control button to enter the menu options, then press the CONFIG control button repeatedly until Display is selected or press the Display screen button. Press this screen button to turn the display off.
  • Page 64 Select the 12 HR screen button for standard Press this screen button to change The navigation system time and the time; select the 24 HR screen the brightness, contrast, and mode analog clock are separate features. button for military time. of the display.
  • Page 65 This system may not be available or For more information if the GPS is interferences may occur if any of the not functioning properly, see If the following is true: System Needs Service and Problems with Route Guidance. The navigation system determines Signals are obstructed by tall the position of the vehicle by using buildings, trees, large trucks,...
  • Page 66 The vehicle has just been The tires are replaced. transferred by a vehicle carrier The tire pressure for the tires is or a ferry. incorrect. Inappropriate route guidance may The current position calibration The tires are worn. occur under one or more of the is set incorrectly.
  • Page 67: Ordering Map Dvds

    Automatic rerouting may display Identification Number (VIN) a route returning to the set available. This helps the center waypoint if heading for a make sure you receive the correct destination without passing and most up-to-date DVD map disc If the navigation system needs through a set waypoint.
  • Page 68: Speech Recognition

    1. Press INFO to enter the menu options, press INFO repeatedly until Speech Help is selected or The navigation system's speech press the Speech Help screen recognition allows for hands-free button. operation of navigation and audio 2. Press the Overview screen system features.
  • Page 69 Press to view Available when listening to music or the current weather condition for the Press INFO to enter the menu audio books that are on the hard city of the vehicle's current position. options, press INFO repeatedly until drive. Press to view Speech Help is selected or press the current condition with a two day...
  • Page 70 Read the following for more information on the software license agreement between GM and ® affiliated companies of Microsoft Corporation: ® Gracenote is a registered The vehicle has the Navigation trademark of Gracenote, Inc. System. It includes software licensed by GM from an affiliate of The Gracenote logo and logotype, ®...
  • Page 71 IF YOU DO NOT AGREE TO THE SOFTWARE is provided AS THE USE OR PERFORMANCE THIS END USER LICENSE IS and with all faults. THE ENTIRE OF THE SOFTWARE. THIS AGREEMENT ( EULA ), DO NOT RISK AS TO SATISFACTORY LIMITATION SHALL APPLY EVEN USE THE DEVICE OR COPY THE QUALITY, PERFORMANCE,...
  • Page 72 If MS, Microsoft Corporation or The SOFTWARE may permit GM, If the SOFTWARE is provided by their affiliates make available MS, Microsoft Corporation or their GM separate from the DEVICE on Supplemental Components, and affiliates to provide or make separate media or via web no other EULA terms are available to you SOFTWARE download or other means, and is...
  • Page 73 All title and intellectual property governed by the respective terms of You may permanently transfer rights rights in and to the SOFTWARE use relating to such services. under this EULA only as part of a (including but not limited to any If this SOFTWARE contains permanent sale or transfer of the images, photographs, animations,...

This manual is also suitable for:

2011 cts2011 cts-v

Table of Contents