Cleaning Tires; Sheet Metal Damage - Cadillac 1999 Catera Owner's Manual

Cleaning Aluminum or
Chrome Plated Wheels (If Equipped)
-
Keep your wheels clean using a soft clean cloth with
mild soap and water. Rinse with clean water. After
rinsing thoroughly, dry with a soft clean towel. A wax
may then be applied.
The surface of these wheels is similar to the painted
surface of your Catera. Don't use strong soaps,
chemicals, abrasive polishes, abrasive cleaners, cleaners
with acid or abrasive cleaning brushes on them because
you could damage the surface. Do not use chrome polish
on any wheels other than chrome
Use chrome polish only on chrome
avoid any painted surface of the wheel, and buff off
immediately after application.
Don't take your vehicle through an automatic car wash
that has silicon carbide tire cleaning brushes. These
brushes can also damage the surface of these wheels.
-
plated wheels.
-
plated wheels, but

Cleaning Tires

To clean your tires, use a stiff brush with a tire cleaner.
NOTICE:
When applying a tire dressing always take care to
wipe off any overspray or splash from all painted
surfaces on the body or wheels of the vehicle.
-
Petroleum based products may damage the paint
finish and tires.

Sheet Metal Damage

If your vehicle is damaged and requires sheet metal
repair or replacement, make sure the body repair shop
-
applies anti corrosion material to the parts repaired or
replaced to restore corrosion protection.
yellowblue
6-51