Headlamps - Buick 2007 Rainier Owner's Manual

Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedal to increase your speed.
When you take your foot off the pedal, your
vehicle will slow down to the cruise control speed
set earlier.
Using Cruise Control on Hills
How well your cruise control works on hills
depends upon your speed, load and the steepness
of the hills. When going up steep hills, you may
want to step on the accelerator pedal to maintain
your speed. When going downhill, you may
have to brake or shift to a lower gear to keep your
speed down. Of course, applying the brake
takes you out of cruise control. Many drivers find
this to be too much trouble and do not use
cruise control on steep hills.
Ending Cruise Control
There are three ways to turn off the cruise control:
•
Step lightly on the brake pedal.
•
Move the cruise switch to off, or
•
Shift the transmission to NEUTRAL (N).
162
Erasing Speed Memory
When you turn off the cruise control or the
ignition, the cruise control set speed memory
is erased.

Headlamps

c
(Off): Turn the knob to this symbol and
release it to turn off the Daytime Running Lamps
(DRL) and the Automatic Headlamps (AHS).
An indicator illuminates when the position
is selected. This position is not available for
vehicles first sold in Canada.
The exterior lamps
knob is located on your
instrument panel to
the left of the steering
wheel.