Buick 2007 Rainier Owner's Manual page 172

2. Set the driver's and passenger's temperature.
To find your comfort setting, start with a
72°F (22°C) temperature setting and allow
about 20 minutes for the system to regulate.
Turn the driver's or passenger's side
temperature knob to adjust the temperature
setting as necessary. If you choose the
temperature setting of 60°F (15°C), the system
will remain at the maximum cooling setting.
If you choose the temperature setting of
90°F (32°C), the system will remain at the
maximum heat setting. Choosing either
maximum setting may not cause the vehicle to
heat or cool any faster.
Manual Operation
To change the current setting, select one of
the following:
w9x
(Fan): This button allows you to manually
adjust the fan speed. Press the up arrow to
increase fan speed and the down arrow to
decrease fan speed. The display will change to
show you the selected fan speed and the driver's
side temperature setting for five seconds.
172
C
(Mode): Press this button to manually change
the direction of the airflow in your vehicle. Keep
pressing the button until the desired mode appears
on the display. The display will change to show
you the selected air delivery mode and the driver's
temperature setting for five seconds.
H
(Vent): This mode directs air to the instrument
panel outlets.
)
(Bi-Level): This mode directs approximately
half of the air to the instrument panel outlets, then
directs the remaining air to the floor outlets.
A little air is directed toward the windshield and
the side window outlets. Cooler air is directed
to the upper outlets and warmer air to the
floor outlets.
6
(Floor): This mode directs most of the air to the
floor outlets. Some air also comes out of the
defroster and side window outlets. The recirculation
button cannot be selected in floor mode.