Headlamp High/Low-Beam Changer; Flash-To-Pass; Windshield Wipers - Buick 2007 Rainier Owner's Manual

Headlamp High/Low-Beam Changer

To change the headlamps from low to high
beam, push the lever toward the instrument panel.
To return to low-beam headlamps, pull the
multifunction lever toward you. Then release it.

Flash-to-Pass

This feature lets you use your high-beam
headlamps to signal a driver in front of you that
you want to pass. It works even if your headlamps
are in the automatic position.
When the high
beams are on, this
indicator light on
the instrument panel
cluster will also be on.
To use it, pull the turn signal lever toward you,
then release it.
If the headlamps are in the automatic position or
on low beam, the high-beam headlamps turn
on. They will stay on as long as you hold the lever
toward you. The high-beam indicator on the
instrument panel cluster comes on. Release the
lever to return to normal operation.

Windshield Wipers

(Mist): Turn the band to mist, for a single
8
wiping cycle. Hold it there until the wipers
start. Then let go. The wipers will stop after
one wipe. If more wipes are needed, hold the
band on mist longer.
(Off): Move the band to off, to stop the wipers.
9
157