High Intensity Discharge (Hid); Lighting; Headlamps - Buick Regal 2018 Owner's Manual

Hide thumbs Also See for Regal 2018:
Table of Contents

Advertisement

High Intensity Discharge
(HID) Lighting
Warning
The High Intensity Discharge
(HID) lighting system operates at
a very high voltage. If you try to
service any of the system
components, you could be
seriously injured. Have your
dealer or a qualified technician
service them.
After an HID headlamp bulb has
been replaced, the beam might be a
slightly different shade than it was
originally. This is normal.

Headlamps

Driver Side Shown, Passenger
Side Similar
1. Low Beam
2. High Beam
Vehicle Care
Low-Beam Headlamp/Daytime
Running Lamp (Base)
1. For the driver side bulb,
remove the windshield washer
bottle filler neck by firmly
pulling it straight up and out of
the bottle.
2. Remove the cap from the back
of the headlamp assembly.
3. Disconnect the electrical
connector.
4. Remove the bulb socket from
the headlamp assembly.
5. Reverse Steps 1 4 to install.
High/Low-Beam Headlamps
(Uplevel)
The high/low-beam headlamps on
the uplevel headlamp system are
Light Emitting Diode (LED) and
should be replaced by your dealer.
285

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents