Airbag Readiness Light - Buick 2006 Rainier Maintenance Manual

Hide thumbs Also See for 2006 Rainier:
Table of Contents

Advertisement

Airbag Readiness Light

There is an airbag readiness light on the instrument
panel, which shows the airbag symbol. The system
checks the airbag's electrical system for malfunctions.
The light tells you if there is an electrical problem.
The system check includes the airbag sensors, the
airbag modules, the wiring and the crash sensing and
diagnostic module. For more information on the
airbag system, see Airbag System on page 1-48.
If the airbag readiness light stays on after you
start the vehicle or comes on when you are driving,
your airbag system may not work properly.
Have your vehicle serviced right away.
This light will come on
when you start your
vehicle, and it will flash
for a few seconds.
Then the light should
go out. This means the
system is ready.
CAUTION:
{
If the airbag readiness light stays on after
you start your vehicle, it means the airbag
system may not be working properly.
The airbags in your vehicle may not inflate
in a crash, or they could even inflate without
a crash. To help avoid injury to yourself or
others, have your vehicle serviced right away
if the airbag readiness light stays on after
you start your vehicle.
The airbag readiness light should flash for a few
seconds when you turn the ignition key to RUN.
If the light doesn't come on then, have it fixed so
it will be ready to warn you if there is a problem.
3-29

Advertisement

Table of Contents
loading

Table of Contents