Table of Contents
Advertisement
Vehicle Personalization
In addition to the following features, your vehicle may
also have features that can be programmed through the
Driver Information Center (DIC). See DIC Vehicle
Customization on page 3-52 for more information.
Memory Seat
These buttons are used to program and recall memory
settings for the driver's seating position, both outside
mirror positions and the adjustable pedals, if equipped.
The settings for these features can be saved for up
to two drivers.
If your vehicle has this
feature, the controls for
the memory function
are located on the
driver's door.
To store the memory settings, do the following:
1. Adjust the driver's seat, including the seatback
recliner and lumbar, both of the outside mirrors
and the adjustable pedals, if equipped, to the
desired position.
2. Press and hold the 1 or 2 button of the memory
control for three seconds. A double chime will
sound to let you know that the position has
been stored.
To repeat the procedure for a second driver, follow
the preceding steps, but press the other numbered
memory control button.
To recall the memory settings, press and release
button 1 or 2 while the vehicle is in PARK (P).
A single chime will sound and the memory position
will be recalled.
To stop recall movement of the memory seat feature
at any time, press one of the memory buttons or power
seat controls.
2-51
Advertisement
Chapters
Table of Contents
