Dt Tx; Dt Mem; Home; Mic.gin - Yaesu FTM-6000R Advance Manual

10 DT TX

Transmitting the registered DTMF code
To send the DTMF code automatically, select the channel on which the DTMF code to
send is registered.
For more details, see "Transmitting the registered DTMF code". (

11 DT MEM

Select and edit the DTMF auto dialer memory channel.
Up to 9 registers of 16-digit DTMF tone codes may be stored.
For more details, see "Registering a DTMF code". (

12 HOME

In the factory default setting, [12 HOME] is registered in the "Function List" that is
displayed when the [F menu] key is pressed.
Recalls the HOME channel
Recall the home channel that is stored in memory.

13 MIC.GIN

Adjust the microphone gain level.
Adjust the input level of the microphone.
MIN / LOW
NORMAL / HIGH
MAX
While pressing the PTT switch, the microphone gain level may be adjusted.
14 MIC.PGM
Set the microphone programable keys
Functions can be assigned to the program keys (P1 to P4) on the provided micro-
phone (SSM-85D).
The default function settings of the [P1] / [P2] / [P3] / [P4] keys are listed below:
[P1]: SQL OFF
[P2]: HOME
[P3]: SCN ON
[P4]: WX (T-CALL: European/Asian versions)
ARTS: Starts or stops the ARTS function.
SCN ON: Starts or stops the scanning function.
HOME: Recalls the HOME channel.
RPT.SFT: Sets the repeater shift direction.
RPT.REV: Reverses the transmit and receive frequencies in repeater mode or split
memory.
TX PWR: Selects the transmit power output level.
SQL OFF: Opens the squelch (Squelch OFF)
T-CALL: Transmits the T-CALL (1750 Hz).
DW: Starts or stops the Dual Watch function.
WX: Switches operation to the Weather Channel Bank.
MIN (Mic gain low) - MAX (Mic gain high)
28
page 11)
page 10)