Yaesu FTM-6000R Advance Manual page 28

Number /
Menu Item
21: RPT.OTR
Activate/Deactivate the Automatic Re-
RPT.ARS
peater Shift feature
RPT.FRQ Set the magnitude of the Repeater Shift
22: SCN.ON Engages the Scan operation
23: SCN.TYP
SCN.RSM Select the Scan Resume mode
Enable/Disable the "Primary Channel Re-
DW RVT
vert" feature.
Selects the Tone Encoder and/or Decod-
24: SQL.TYP
er mode.
Set the CTCSS Tone Frequency or the
25: SQL.COD
DCS code.
Enable/Disable the split CTCSS/DCS
26: SQL.EXP
coding
27: STEP Set the frequency synthesizer steps
Indicates the current temperature inside
28: xx.xF (C)
the transceiver
29: TOT Set the Time-Out Timer
30: TX PWR* Set the transmit power level.
31: VER.DSP Display the transceiver software version
32: xx.xV Indicates the DC Supply Voltage.
Set the FM transmit modulation level and
33: WIDTH
receiver bandwidth
34: WX ALT Weather alert operation setting
35: BLT
BLT.OFF Set the Bluetooth function
BLT.LST Bluetooth device list
BLT.SAV Set the Bluetooth save function
BLT.AF Set the Bluetooth received audio output
* In the factory default, the grayed settings are assigned to the "Function list" that is displayed when the
[F menu] key is pressed.
Description
25
Selectable options
(Options in bold are the default settings)
OFF / ON
0.00 - 99.95 (MHz)
(Depends on the transceiver version.)
---
BUSY / HOLD / 1 SEC / 3 SEC / 5 SEC
OFF / ON
OFF / TON.ENC / TON.SQL / REV.TON
/ DCS / PR FRQ / PAGER / DCS.ENC* /
TONE.DCS* / DCS.TSQ*
*Displayed when "26 SQL.EXP" is "ON".
CTCSS: 67.0 to 254.1 (Hz) (100.0Hz)
DCS: 104 standard DCS codes (023)
OFF / ON
AUTO / 5 / 6.25 / (8.33) / 10 / 12.5 / 15 /
20 / 25 / 50 / 100 (kHz)
(8.33 kHz: only for Air band)
---
OFF* / 1 MIN / 2 MIN / 3 MIN / 5 MIN* /
10 MIN / 15 MIN / 20 MIN / 30 MIN
(Depends on the transceiver version.)
LOW / MID / HIGH
Mxx.xx (MAIN)
Pxx.xx (PANEL)
---
WIDE/NARROW
OFF/ON
OFF/ON
---
OFF/ON
AUTO/FIX