Digital Code Squelch (DCS) feature
The Digital Code Squelch opens the speaker audio only when a signal containing the
specified DCS code is received.
Setting the DCS CODE
The DCS code may be selected from 104 types (from 023 to 754).
1. Press and hold the [F menu] key.
2. Rotate the DIAL knob to select [24 SQL.TYP] then
press the DIAL knob.
3. Rotate the DIAL knob to select "DCS".
4. Press the [SQL back] key, then rotate the DIAL
knob to select [25 SQL.COD].
5. Press the DIAL knob, then rotate the DIAL knob to
select the DCS code.
6. Press the DIAL knob to save the setting and return
to normal operation.
"DCS" is displayed on the screen.
• The DCS code set in the above operation is common for all transmissions with a DCS
Code (DCS, DCS.ENC, TON.DCS, DCS.TSQ).
• The default DCS code is "023".
5