Wiring The Camera Module - Bosch FLEXIDOME IP indoor 8000i Installation Manual

FLEXIDOME IP indoor 8000i
10. Drill the 4 holes with the appropriate diameter drill to support your 5-6 mm (0.2 inch)
11. Install 4 plugs in the holes.
12. Attach the mounting plate to the surface with 4 screws. Tighten the screws between 4
13. Install the conduit cover on the conduit plate with the bolt. Tighten the screw between
14. Prepare camera module and remove the conduit door.
6.2

Wiring the camera module

1.
Bosch Security Systems B.V.
screws and plugs.
and 7 Nm (3 and 5.2 lbfft).
1.4 and 2 Nm (1 lbfft and 1.5 lbfft).
Remove the camera module from the box.
Installation manual
Hardware installation | en
2021-08 | 01 |
17