Table of Contents
Advertisement
FLEXIDOME IP starlight
6000 VR
–
–
5.4
Mounting the camera module
5.4.1
Mounting flush to ceiling
To mount the camera flush to the ceiling:
1.
2.
3.
4.
5.
4S box
(x2)
133 (
Ø
Bosch Security Systems
To connect a monitor for set-up, use the optional 3 m cable
(NBN-MCSMB-30M) to connect directly to the CVBS
connector of a monitor.
For a permanent analog output, use the optional 0.3 m
cable (NBN-MCSMB-03M) to connect to a high quality coax
cable.
Mark out the recess hole and the three mounting holes. The
mounting holes are equally spaced around a diameter of
133 mm (5.25 in).
Cut out the inner recess hole: Ø105 mm (4.13 in).
Use a 8 mm (0.31 in) bit to drill the three mounting holes
Insert the supplied mounting plugs (8 x 40) into the
mounting holes.
Use the supplied screws (DIN7505-B 50mm) to securely
mount the camera to the ceiling surface; if the ceiling is too
thin, use appropriate ceiling bolts (not supplied).
57.6 (2.27)
5.25)
Ø
57.6 (2.27)
mm (in)
Installation | en
2016.06 | v1.0 | AM18-Q0711
17
Advertisement
Table of Contents
