Wiring The Camera Base - Bosch FLEXIDOME multi 7000i IR Installation Manual

22 en | Installation
5.2.3

Wiring the camera base

Network connection
1.
Auxiliary connections - power connection
Notice!
i
IP66 water/dust protection
For IP66 water/dust protection, use cables with a diameter of at least 5 mm.
Notice!
IP66 water/dust protection
i
If you split up the auxiliary connections into two cables before routing them through the M20
rubber grommet, the camera loses the IP66 water/dust protection. Route only one cable
through the M20 rubber grommet to keep the IP66 water/dust protection.
2023-02 | 02 |
Connect the network cable to the network connector.
Installation manual
FLEXIDOME multi 7000i IR
Bosch Security Systems B.V.