Table of Contents
Advertisement
Changing Blade
Blades should be changed when they become
dull, damaged, or when your operation requires a
different blade.
A list of optional replacement blades is listed
on Page 32. We recommend keeping several
sets of blades on-hand to avoid downtime and
to be properly prepared to cut different types of
material.
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Tool Needed
Phillips Head Screwdriver #2 ............................ 1
To change blade:
1.
DISCONNECT MACHINE FROM POWER!
2.
Raise headstock fully and use head-locking
pin to keep headstock upright (see Figure 45).
Locking
Pin
Figure 45. Headstock fully raised and locked in
position.
-38-
Qty
Blade Tension
Knob
x 2
3.
Loosen blade tension knob fully.
4.
Remove (2) Phillips head screws and flat
washers shown in Figure 45.
5.
Loosen extension guard lock knob, fully raise
extension guard, and tighten lock knob to
secure (see Figure 46).
Extension Guard
Lock Knob
Figure 46. Extension guard in raised position.
Before proceeding with the next step, wear
gloves to protect your hands while handling
and installing the blade.
6.
While wearing heavy gloves, open frame
guard and remove blade from wheels.
Model G0926 (Mfd. Since 11/20)
Extension Guard
(Hidden by
Frame Guard)
Advertisement
Table of Contents
