Planet WDAP-C1800AX User Manual page 97

Dual band 802.11ax 1800mbps ceiling-mount wireless access point w/802.3at poe+ and 2 10/100/1000t lan ports

Hide thumbs Also See for WDAP-C1800AX:

Table of Contents

User Manual of WDAP-C1800AX

Step 1. Use static IP in the PCs that are connected with AP-1(Site-1) and AP-2(Site-2). In this case, Site-1 is

"192.168.1.100", and Site-2 is "192.168.1.200".

Step 2. In AP-2, change the default IP to the same IP range but different from AP-1. In this case, the IP is

changed to 192.168.1.252.

Step 3. In AP-1, go to "Wizard" to configure it to AP Mode. In AP-2, configure it to Repeater Mode.

AP-1

-90-

Table of Contents