5.5.4 Advanced - Planet WDAP-C1800AX User Manual

5.5.4 Advanced

5.5.4.1.
Advanced
The page includes the following fields:
Object
User Isolation
Short GI
Coverage Threshold
Packet Threshold
RTS Threshold
DFS
Figure 5-19 Advanced
Enable it to isolate each connected wireless client so that they cannot
access mutually
Guard intervals are used to ensure that distinct transmissions do not
interfere with one another
The coverage threshold is to limit the weak signal of clients occupying
session. The default is -95dBm
When the length of a data packet exceeds this value, the router will
send an RTS frame to the destination wireless node, and the latter will
reply with a CTS frame, and thus they are ready to communicate. The
default value is 2346
Enable or Disable RTS/CTS protocol. It can be used in the following
scenarios and used by Stations or Wireless AP.
1) When medium is too noisy or lots of interferences are present. If the
AP/Station cannot get a chance to send a packet, the RTS/CTS
mechanism can be initiated to get the packet sent.
2) In mixed mode, the hidden node problem can be avoided.
The default value is 2347
Enable or Disable DFS (Dynamic Frequency Selection) function
-44-
User Manual of WDAP-C1800AX
Description